You also need to make sure you get the best bike lights for the job. Lights that attach with screw-tightening mechanisms are much more secure than those that come with a strap. And models that can be charged by USB are easier to keep powered than old-fashioned, battery models. We’ve pulled together a step-by-step guide on installation for you, which includes a guide to placing the lights and how to tighten them properly. For more tips and advice on cycling, have a read through our round-up of the best bike helmets and our guide to cycling at night.
First, get the right lights
To comply with the rules of the road in the UK you’ll need a front-facing white light and a rear-facing red light. In the US you also need a white front light but you can use a red rear reflector instead of a light (we’d recommend using a red light anyway, because it helps with visibility.) You can add some flashing lights to your set-up if you want to be even more visible – just make sure you’re within the legal limits. In the UK it’s legal to use flashing lights, as long as they flash between 60 and 240 times per minute and give off at least 48 lumens of light (check the packaging for the number of lumens). In the US the law on flashing lights varies from state to state, so check the local rules (opens in new tab) before you purchase any. Most lights come with a simple clamp or strap that you affix to your handlebars; clamps can be tightened with a screw mechanism and straps loop around bars and fasten onto themselves. In our experience, screw-on clamp lights are much more secure than those with a strap based mechanism, and less likely to fly off if you go over a pothole.
Choose where to place your lights
The white bike light goes at the front, facing forwards, and the red bike light goes at the back, facing backwards. Normally you install the white light on the handlebars, and the red light on the seatpost, but the red light can also be attached to a bike rack if you have one over the rear wheel. Don’t be tempted to put your rear light on your mudguard as this is too low and won’t be seen by drivers. It’s also best to position the lights as centrally as possible, as this will give the clearest indication of where you’re positioned in the lane.
Identify the gripping mechanism
Bike lights come with all kinds of mechanisms, but usually you’ll have to affix something to your handlebars or seat clamp that will ‘hold’ the light in place. Your light should come with instructions on how to do this, but if you’ve misplaced them here’s what you typically need to do: Screw on clamp Strap
Maintain your lights
Maintaining your lights is just as important as fitting them correctly. You need to check that they’re secure before you set off at night — and make sure the lights themselves are clean and fully charged. Mucky lights that are low on battery will be fainter and less effective. Most modern lights are charged by USB cable. Get into the habit of charging regularly so you’re never caught out on a dark night. If you’ve got an old-fashioned, battery-powered light, keep some spare batteries in your cycling kit.
title: “How To Install Bike Lights” ShowToc: true date: “2022-12-26” author: “Charles Mendoza”
You also need to make sure you get the best bike lights for the job. Lights that attach with screw-tightening mechanisms are much more secure than those that come with a strap. And models that can be charged by USB are easier to keep powered than old-fashioned, battery models. We’ve pulled together a step-by-step guide on installation for you, which includes a guide to placing the lights and how to tighten them properly. For more tips and advice on cycling, have a read through our round-up of the best bike helmets and our guide to cycling at night.
First, get the right lights
To comply with the rules of the road in the UK you’ll need a front-facing white light and a rear-facing red light. In the US you also need a white front light but you can use a red rear reflector instead of a light (we’d recommend using a red light anyway, because it helps with visibility.) You can add some flashing lights to your set-up if you want to be even more visible – just make sure you’re within the legal limits. In the UK it’s legal to use flashing lights, as long as they flash between 60 and 240 times per minute and give off at least 48 lumens of light (check the packaging for the number of lumens). In the US the law on flashing lights varies from state to state, so check the local rules (opens in new tab) before you purchase any. Most lights come with a simple clamp or strap that you affix to your handlebars; clamps can be tightened with a screw mechanism and straps loop around bars and fasten onto themselves. In our experience, screw-on clamp lights are much more secure than those with a strap based mechanism, and less likely to fly off if you go over a pothole.
Choose where to place your lights
The white bike light goes at the front, facing forwards, and the red bike light goes at the back, facing backwards. Normally you install the white light on the handlebars, and the red light on the seatpost, but the red light can also be attached to a bike rack if you have one over the rear wheel. Don’t be tempted to put your rear light on your mudguard as this is too low and won’t be seen by drivers. It’s also best to position the lights as centrally as possible, as this will give the clearest indication of where you’re positioned in the lane.
Identify the gripping mechanism
Bike lights come with all kinds of mechanisms, but usually you’ll have to affix something to your handlebars or seat clamp that will ‘hold’ the light in place. Your light should come with instructions on how to do this, but if you’ve misplaced them here’s what you typically need to do: Screw on clamp Strap
Maintain your lights
Maintaining your lights is just as important as fitting them correctly. You need to check that they’re secure before you set off at night — and make sure the lights themselves are clean and fully charged. Mucky lights that are low on battery will be fainter and less effective. Most modern lights are charged by USB cable. Get into the habit of charging regularly so you’re never caught out on a dark night. If you’ve got an old-fashioned, battery-powered light, keep some spare batteries in your cycling kit.
